Sunpak Heating Systems

The streamlined design and stainless steel look blends in well with most any decor. SUNPAK patio heaters easily mount on outdoor walls, under ceilings and awnings.

SUNPAK is A.G.A. design-certified as an unvented infrared heater for outdoor or indoor installation. All units are equipped with spark ignition and 100% shutoff for safety, economy, and convenience.

SUNPAK's aluminized steel enclosure and aluminum face grille provides resistance to wind and rain. A slim body and 0-30 degree angle mounting option on most models, gives SUNPAK patio heaters the versatility to fit easily into a wide variety of patio situations.

SUNPAK's radiant sunshine warms people with quiet, gentle heat. Radiant heat warms people and objects (like chairs and tables) rather than the air.

SUNPAK patio heaters are simple to operate, inexpensive to use and easy to maintain.

FEATURES INCLUDE:

• Slim Profile
• Decorative Safety Grille
• Reduced Clearance Requirements
• Angle Mounting -- Zero to 30 Degrees
• Ideal for Wind Protected Areas
• Rain Protected
• 25,000 or 34,000 BTU/Hr. Input
• Natural or Propane Gas
• Direct Spark Ignition
• 100% Safety Shutoff

Your Patio Will Shine With SUNPAK Stainless Steel Heaters!

The SUNPAK® patio heaters provide radiant warmth for you, in a wide variety of applications.

Coverage and Comfort:
Two basic SUNPAK® models are available. The model S25, with an input rating of 25,000 BTUH, is suitable for patios with a medium ceiling height. The model S34, with an input rating of 34,000 BTUH, will cover a slightly larger area, but requires a higher ceiling. In a moderate climate, SUNPAK® patio heaters can be expected to raise the outdoor comfort level up 10 degrees. The S25 heater typically covers a 10 foot x 10 foot area. Coverage will vary with ambient temperature, wind chill, mounting height and tilt angle of the heaters.

Appliance Design:
SUNPAK'S aluminized or stainless steel enclosure, together with the aluminum face grill, provides resistance to wind and rain. SUNPAK's slim body design (8 x 8 x 48 inches) and 0 to 30 degree angle mounting option on most models, gives SUNPAK® the versatility to fit easily into a wide variety of patio situations. An optional mounting kit (part no. 12006-#) is available.

Code Compliance:
The SUNPAK® patio heater is design certified by the CSA International as an unvented infrared heater for outdoor and indoor installation. All units are equipped with spark ignition and 100% shutoff for safety, economy, and convenience.

Maintenance:
Annual maintenance of all outdoor heaters is recommended. To ensure proper operation of the heater, this maintenance should include removal of cobwebs and other debris which may obstruct the gas flow through the orifice, air flow into the main burner, or pilot.