|
gas heaters | infrared heaters | electric heaters
Enerco Heaters
Enerco gas, infrared electric heaters. Enerco features many gas heaters,
infrared heaters and electric heaters to provide efficient heating for
manufacturing plants, garages, workshops, and warehouses.
Infrared Radiant Heaters:
|
|
EnterRadiant XL Features:
- The XL features a Honeywell Smart Valve II which combines the
gas valve and ignition control into one single unit.
- All components and name-brand non-proprietary and available through
local distributors.
- All natural gas units include an LP gas conversion kit.
- Available in 60,80,100,125,150,175,000 BTU/hr capacities.
- 20 to 60 foot system lengths.
- Installs as "U-Tube" or "L" configuration with optional kits.
- Hanger design allows horizontal or 45 degree angle of reflectors.
- Vent adapter included
|
|
Typical Applications:
Manufacturing plants, truck terminals, repair shops and garages, warehouses,
aircraft hangers, fire stations, automobile dealerships and body shops,
loading docks, farm buildings, indoor sporting arenas, stables and
many others are common applications for Enerco infrared radiant tube
heaters. |
| |
 |
HeatStar Features:
- Compact 3" Aluminized Steel U-Tube Design
- Provides Uniform Heat Distribution
- Polished Aluminum Deep-Dish Reflecter
- Burner and Tube/Reflector Assembly Shipped In Separate
Cartons to Eliminate Shipping Damage.
|
45,000 BTU/HR Heater For:
- Residential Garages
- Small Shops
- Restaurant Decks & Patios
- Entrance Ways
- Golf Driving Ranges
- Bus & Smoking Shelters
|
|
Please call 1-800-632-7138
for pricing and more information about ENERCO HEATERS products.
High Intensity Infrared Heaters:
|

|
High Intensity Features:
All high intensity heaters have multiple outputs per model series.
Additional burner orifices are included with each heater that enables
the installer to increase or decrease the output of the heater.
A complete range of BTU/hr outputs, 30,000 to 140,000 can be accomplished
with only four (4) different models.
All spark ignition control heaters shipped with 40VA transformer
All millivolt control heaters shipped with thermostat.
Non-corrosive materials are used throughout heater construction.
|
| Forced warm air units
heat from ceiling down. Wasted layers of heat stay at ceiling
level, leaving floors cold, drafty and uncomfortable. |
|
Infrared heaters direct
line-of-sight radiant heat to floor-level objects, which in
turn, heat surrounding air to desired temperature. |
|
Typical Applications:
Buildings with high ceilings, hard to heat areas, or buildings which
require only spot heating are more effectively heated using high intensity
infrared heaters. Infrared heaters operate more effectively because
they direct heat to a particular area or object without affecting
the temperature of the intervening air space. Warehouses, large high
bay manufacturing plants, factories, loading docks areas, service
garages, body shops, golf driving ranges and welding/fab shops are
a few of the more common applications for high intensity infrared
heaters. |
Garage and Small Shop Heaters:
|

|
Turn Up The Heat In Your Garage!
Enerco's natural or propane gas-fired, AGA approved, infrared garage/shop
heater brings the sun indoors. Just like the sun's radiant energy,
the heat from an Enerco garage/shop heater radiates heat to floor-level
objects which in turn heat surrounding air to the desired tempature.
Manufactured to meet the special needs of garages and small shops.
All necessary brackets, hardware and thermostat are included. No electricity
required; simply run a gas line and make your garage a workshop year
'round. |
Why Heat a Garage:
There are 40 million single family residential garages in the
U.S.
Garges represent the most under-utilized space in most climates
during the winter months.
Uncomfortable temperatures prevent activity in the garage during
the winter months.
- DIY Auto / Mechanical maintenance
- Workshop / Hobby activities
- Recreation (exercise equipment/table tennis)
- Pet comfort
- Laundry
Fifty-five percent of all homes are plumbed with natural gas.
A typical two car garage represents approximately 20% of the usable
space in an average home.
Cold temperatures in the garage are also detrimental to vehicles
and house plumbing:
- Ice, snow and salt stay frozen on auto sheet metal
- Damaging cold engine starts
- Slow car heater warm-up
- Plumbing in garage or adjacent walls may freeze.
|
 |
Product Features:
Safe AGA Design Certified (American Gas Association)
Inexpensive to operate
Important Facts & Features
Thermostatically controlled.
100% fuel efficient.
Heats up to 550 sq. ft. (2½ car garage).
Warms adjoining work / living areas.
Operates for just pennies per hour.
No electrical cost. Gas control is a self generating power-pile
millivolt control.
No direct venting
|
Maintenance Free
No filters to change.
No motors to oil.
No service calls to clean or adjust heater at the start
of the season.
Warranty
1 year on gas control
5 years on burner
Quality
Manufactured by ENERCO TECHNICAL PRODUCTS, INC. a
leading manufacturer of infra-red heating and process equipment
for more than 30 years.
|
|
Applications:
Garages, utility shops, storage sheds, patios, auto repair, farm buildings.
(DO NOT use this heater in living areas, sleeping quarters,
mobile homes, or recreational vehicles.) |
|
H25N/H22L Specifications:
| Model Number |
BTU/Hr. Rating
Gas |
Normal Mounting
Position |
Clearance to combustable |
|
Natural
|
Propane |
|
Top |
Side |
Back |
Below |
| H25N |
25,000 |
- |
30° |
14" |
16" |
12" |
48" |
| H22L |
-
|
25,000 |
30° |
14" |
16" |
12" |
48" |
|
Reflector Dimensions L-W-H (Inches)
|
Total Dimensions
L-W-H (Inches) |
Shipping weight
(Lbs.) |
Gas Inlet
|
| 261/2"
X 119/16" X 31/4" |
293/4"
X 121/4" X 7" |
22 |
1/2" |
| 261/2"
X 119/16" X 31/4" |
293/4"
X 121/4" X 7" |
22 |
1/2" |
|
|
|